Razer blackshark v2x драйвера



Razer BlackShark V2 X Support

At a Glance: Razer BlackShark V2 X

The best entry-level esports gaming headset with tournament-grade features – the BlackShark V2 X | RZ04-0324 features an over-ear closed cup design for improved passive noise cancellation. It is equipped with the all-new Razer™ TriForce 50 mm Drivers and 7.1 Surround Sound, that provide an immersive gaming audio experience…read more

Why can’t I hear anything when using the Razer BlackShark V2 X?

Here are some suggestions that may help:

    Check the volume control and make sure it is not turned all the way down. Rotate the volume knob to increase/decrease the volume as shown below:

  • To rule out any source issues, connect your Razer BlackShark V2 X to a different audio source.
  • Ensure the source volume is not set to zero.
  • Ensure you have selected the correct playback audio device.
    • If you are using Windows 10 build 2004, try the sound troubleshooter.
      • Right click on the volume icon and click “Troubleshoot sound problems” to start and follow the troubleshooter recommendations.

      If you are using another build of Windows 10, navigate to the “Sound Control Panel” and test the speakers.

        Right-click on the sound icon and click on “Sound Control Panel” and select your internal sound card.

      Right-click on it and click “Test”.

      I am hearing a slight distortion with my voice using the Razer BlackShark V2 X

      This is commonly experienced when the microphone is overloaded with sound. Try to position the microphone further from your mouth when talking.

      How to remove and reattach Razer BlackShark V2 X ear cushions

      Below are the steps on how to remove and reattach the ear cushions of your Razer BlackShark V2 X headset:

        To remove the headset’s ear cushion, hold the outer lip (not the outer rim) of the cushion and gently pull it off.

    • To reattach the ear cushion, put some of the cushion’s outer lip on to the ear cushion holder (platelike part), and gently insert the rest of it into place. Ensure it is uniformly and smoothly attached.

    How to properly clean your Razer BlackShark V2 X

    Below are some tips on how to properly clean your Razer BlackShark V2 X:

    • For external dirt or dust, use a soft, dry cloth to wipe the headset.
    • For stubborn dirt, dilute your regular detergent with water and soak the cloth for a few minutes. Make sure to squeeze the water out of the cloth well before using it to wipe away the dirt from the headset.
    • Never use solvents such as thinner, benzene, or alcohol to clean your headset since these may damage the surface.

    Is 7.1 Surround Sound required for the BlackShark V2 X to work?

    The 7.1 Surround Sound app is not necessary for basic functionality, but it is recommended to use it with the BlackShark V2 X to fully experience its immersive gaming audio features.

    To learn more about 7.1 Surround Sound, see 7.1 Surround Sound FAQs.

    Источник

    Razer blackshark v2x драйвера

    RAZER™ TRIFORCE 50MM DRIVERS

    Our all-new patented design allows our engineers to custom tune each driver as though there are three—allowing for the individual replications of high, mid and low audio frequencies to deliver on richer trebles, brighter sound and powerful bass.
    Learn more >

    RAZER™ HYPERCLEAR CARDIOID MIC

    Offering greater speech pickup and noise cancellation, the bendable mic on this lightweight esports headset has an optimized microphone housing which adopts a more open design for minimal obstruction—resulting in improved clarity for a closer recreation of your voice.
    Learn more >

    ADVANCED PASSIVE NOISE CANCELLATION

    From cheering crowds to the hum of your rig, shut noise out and enjoy uninterrupted focus with special closed earcups that fully cover your ears, aided by plush cushions that form a closer seal for greater sound isolation.

    Lightweight Comfort

    At just 240g, you’ll barely remember you have it on during gaming marathons. The headset is made even more comfortable thanks to thicker heading padding and improved memory foam ear cushions wrapped in a combination of breathable fabric and plush leatherette.

    Heighten your match awareness and let nothing escape your ears with accurate positional audio that lets you pinpoint intuitively where every sound is coming from.

    *Only available on Windows 10 64bit

    This lightweight esports headset uses a 3.5mm jack and works across popular platforms, allowing you to seek out competition on PC, Mac, PS4, Xbox One, Nintendo Switch and mobile devices*.

    *Mobile devices with an available 3.5mm port

    “Insanely comfortable and light, with great noise cancellation.”

    — Karrigan mousesports | CS:GO

    “Light, comfortable and great for extended wear.”

    “It looks and feels as good as it sounds”

    — Scout EDG | League of Legends

    “With noise cancellation like this, it’s so easy to focus.”

    Razer™ TriForce Titanium 50mm Drivers Razer™ TriForce 50mm Drivers
    Removable Razer™ HyperClear Cardioid Mic with USB Sound Card Fixed Razer™ HyperClear Cardioid Mic
    Advanced mic control features
    Ultra-soft FlowKnit memory foam ear cushions Standard breathable memory foam ear cushions
    Razer™ SpeedFlex Cable Standard rubber cable
    THX Spatial Audio 7.1. Surround Sound
    Connectivity – 3.5mm jack + USB sound card Connectivity – 3.5mm jack
    Weighs 262g Weighs 240g
    View the Razer BlackShark V2 >

    What kind of mic does the Razer BlackShark V2 X have?

    The Razer BlackShark V2 X comes with a bendable Razer HyperClear Cardioid Mic – tuned to have a more focused voice pick-up area.

    To use the mic, bend it until it is parallel to your mouth. Make sure the mic diaphragm is in front and the air vent is facing away from your mouth. We’ve placed a small mic icon on the side of the mic diaphragm for added convenience – so you can easily tell which side should be facing your mouth.

    Does the BlackShark V2 X offer surround sound?

    Yes, the Razer BlackShark V2 X features 7.1 Surround Sound* for added immersion across music, movies, and games.
    *Only available on Windows 10 64-bit

    Is the Razer BlackShark V2 X powered by Razer Chroma?

    No, the Razer BlackShark V2 X does not feature Razer Chroma RGB Lighting.

    What color variants are available for the Razer BlackShark V2 X?

    The Razer BlackShark V2 X is available in Classic Black and Razer Green.

    What are the connectivity options available for the Razer BlackShark V2 X?

    The Razer BlackShark V2 X can be connected through its 3.5mm audio jack.

    Источник

    Razer BlackShark V2 Support

    At a Glance: Razer BlackShark V2

    The BlackShark V2 | RZ04-0323 is the definitive esports gaming headset. Featuring the all-new Razer™ TriForce Titanium 50 mm Drivers, it delivers brighter sound and vocals that are clear and crisp, with richer trebles and more powerful bass. Combining this with THX Spatial Audio, it provides a truly immersive gaming audio experience…read more

    What is the USB Sound Card for and can Razer BlackShark V2 still work without it?

    The USB Sound Card on the Razer BlackShark V2 provides access to advanced audio and mic controls via Synapse 3. The BlackShark V2 will still work without it using the analog 3.5 mm jack.

    Can I use the Razer USB Sound Card with other headphones with 3.5mm jack?

    The Razer USB Sound Card is specifically tuned for the Razer BlackShark V2 headset. Third-party headsets may be able to work using the Razer USB Sound Card, but the effects may differ depending on how the third-party headset drivers are tuned.

    Why can’t I hear anything when using the Razer BlackShark V2?

    Here are some suggestions that may help:

      Check the volume control and make sure it is not turned all the way down. Rotate the volume knob to increase/decrease the volume as shown below:

  • To rule out any source issues, connect your Razer BlackShark V2 to a different audio source.
  • Ensure the source volume is not set to zero.
  • Ensure you have selected the correct playback audio device.
  • Using the 3.5 mm connection:

      If you are using Windows 10 build 2004, try the sound troubleshooter.

        Right click on the volume icon and click “Troubleshoot sound problems” to start and follow the troubleshooter recommendations.

      If you are using another build of Windows 10, navigate to the “Sound Control Panel” and test the speakers.

        Right-click on the sound icon and click on “Sound Control Panel” and select your internal sound card.

      Right-click on it and click “Test”.

      Using the Razer USB Sound Card:

      • Ensure that the Razer USB Sound Card and the 3.5mm jack are properly plugged in.
      • If you are using Windows 10 build 2004, try the sound troubleshooter.
        • Right click on the volume icon and click “Troubleshoot sound problems” to start and follow the troubleshooter recommendations.

      If you are using another build of Windows 10, navigate to the “Sound Control Panel” and test the speakers.

        Right-click on the sound icon and click on “Sound Control Panel” and select “Razer USB Sound Card”.

      Right-click on it and click “Test”.

      Why can’t people in my chat party hear me when I talk?

      Here are some suggestions that may help:

        Ensure that the microphone is attached properly and bend it until it is parallel to your mouth.

      Ensure that the microphone diaphragm is in front of your mouth.

      Check the controls and make sure that the microphone is not muted. The green band around the mute button will show when the microphone is not muted.

    • Ensure that the microphone level on your console or PC is not set to zero or muted. Checking for troubleshooting guides from your console’s manufacturer support site may also help.

    I am hearing a slight distortion with my voice using the Razer BlackShark V2

    This is commonly experienced when the microphone is overloaded with sound. Try to position the microphone further from your mouth when talking.

    How to remove and reattach Razer BlackShark V2 ear cushions

    Removal and reattachment of the ear cushions of your Razer BlackShark V2 must be done properly to prevent any damage to its parts…read more

    How to properly clean your Razer BlackShark V2

    Below are some tips on how to properly clean your Razer BlackShark V2:

    • For external dirt or dust, use a soft, dry cloth to wipe the headset.
    • For stubborn dirt, dilute your regular detergent with water and soak the cloth for a few minutes. Make sure to squeeze the water out of the cloth well before using it to wipe away the dirt from the headset.
    • Never use solvents such as thinner, benzene, or alcohol to clean your headset since these may damage the surface.

    Will I still be able to use my Razer BlackShark V2 without Synapse 3?

    Yes, but Synapse 3 and the Razer USB Sound Card are essential to get the most out of your Razer BlackShark V2. Synapse 3 enables the THX Spatial Audio which provides a truly immersive gaming audio experience with lifelike immersion, ensuring greater positional accuracy and true-to-life acoustics, optimized by THX. THX Spatial Audio within Synapse 3 is only available when using the Razer USB Sound Card.

    To learn more about THX Spatial Audio, see THX Spatial Audio FAQs.

    Источник

    You may also like...